Atlantis ISUS gains great interest in Birmingham

We were blown away by the incredible interest in ISUS CAD/CAM technology for implant restorations last night in Birmingham. It was literally standing room only for the talk by Steve and Tim.

Here's Dr Tim Doswell giving a compelling presentation on the inconsistency and potential problems with outdated cast screw retained implant restorations.

Don't get us wrong, we love "hand made" items, in fact it's a label we look for, but only when we are at a local food market or craft shop.

When it comes to medical devices on implant fixtures however we prefer to offer our surgeons and their patients precise, clinically superior, consistent and cost effective screw retained implant restorations.

CAD/CAM isn't a revolution, it's just evolution.

If you would like to know more about CAD/CAM screw retained restorations from Atlantis ISUS or have a case in mind then we have a dedicated page for this on our site

Team AC does Spartan Yorkshire

We're incredibly proud of the team for taking on the challenge of The Spartan Race Yorkshire 2013.

It's a fun challenge and it was fantastic to see the team soak it all up and come out of the other side raring for more.

We always knew we had a great team but the effort and support they showed to each other on this challenge really showed what a great team they are,

Our friend Sarah Glover was there as an Ambridge Ceramics Spartan Racer showing that anything a technician can do, a dentist can match. Not only did Sarah get the finishers medal & Spartan T Shirt, she was luck enough to leave with an exclusive Ambridge Ceramics Spartan Racer Vest!

So, what was it like? We've got a few snapshots from the day to help tell the story

For many of these pictures we must thank Richard Egan, Melissa Duncan, Adam Glassford and anyone else who helped us capture some fantastic memories of our fun in the mud.

Here was the team before the start, all ready and raring to go

When we got to the start we were given a little warm up from this Spartan, after his rousing speech there was no stopping us, right up until the first of the 3 very steep hills that is....

There were a few nasty sprains, twists and cuts on the day though, We think Mark Ambridge wins with this beauty (the split eyebrow might just help add to the winner)

Although this was closely followed by Sean Easey who was walking on an ankle the size of a balloon.

Dr. Sarah Glover from Birdgate Dental in Pickering was also a member of the AC Spartan team and doing a great job of flying the flag for adventurous dental surgeons out there, she was even smiling all the way through it as you can see below.

Our newest member of the team Jack Gleave however, seemed to be wondering what he's let himself in for when he joined us, but don't let the picture fool you, he was loving the day and is now looking for the next challenge to take on!

We were incredibly fortunate that one of our oldest friends is not only a very skilled technician over at Egan Dental Laboratory, he's also a Fellow of the Royal Photographic Society and decided to pop along and capture a few images for us, which is why we have these excellent pictures that captured the moment so well from the day.

Here's just a few of the fantastic pictures her captured (including the 2 above of Jack and Sarah)

Amanda & Natalie showing determination

Lee hanging around

Sean's missed his casting in Rambo

Mark, who was already carrying the cut eye and injured arm by this point

Iain just loving the mud

Ange claimed to hate the mud but seems to be having a ball here

There's far too many images to fill up this blog so we have posted them all on our FB page in our Spartan Album which you can view here

Do you fancy joining us on next years challenge? let us know at info@ambridgeceramics.com

Dentist completes Iron Man Challenge

Dr Tim "Iron Man" Doswell has done it! Not only is Tim a very skilled implant surgeon, he's now official and Iron Man.

Tim managed to complete the challenge in a very respectable 15hrs 32 mins which is a great achievement in itself, but it's also worth noting that the one in Wales is commonly acknowledged as the hardest Iron man to do.

If you've never heard of an Iron Man, it's a 2.4 mile open water swim, followed by a 112 mile bike ride & finally a Marathon, yes the full 26.2 miles!

Any of these alone is quite a challenge, but to do them all in succession on the same day Is a superhuman effort and the money he raised for Alder Hey children's hospital was certainly hard earned.

The full timing of Tims effort is on the attached picture and there's still time to make a donation to his chosen charity if you missed the chance beforehand.

http://www.justgiving.com/Tim-Doswell-ironman

But finally from all the team at AC, well done Tim!

Skilled ceramist joins our talented team

We would like to introduce you to our latest member of the ceramic team.

Jack Gleave is an incredibly talented and passionate technician and we are very proud to have have him joining our talented team of ceramists.

Jack is very experienced with many different ceramic systems and particularly Creation ceramic, in which he trained with the creator of the system Willi Geller and world respected ceramist Sascha Hein. Jack also demonstrated the Creation ceramic system to other technicians at The Dentistry Show this year on behalf of Cendres+Metaux.

Thanks to our growing success we are constantly looking to attract the most talented technicians to to join our team and ensure our surgeons continue to get the very best aesthetic results along with the best technical support and advice from the rest of the team.

This latest addition to our team adds to the wealth of creative talent that we are proud to have supporting our surgeons.

We will post up some of the beautiful work from all our ceramists over the coming months.

Upcoming speaking dates

We're very proud and honoured to be asked to share our knowledge and experience with CAD/CAM and implant restorations for both the ADi and Atlantis Isus.

 The upcoming dates are :-

Location - Birmingham

Speakers - Dr Tim Doswell - Steve Campbell


Date - 19th September - Atlantis Isus - A guide to using the system for surgeons & technicians

Tim & Steve will demonstrate the unique clinical and cost effective advantages offered by using a premium CAD/CAM partner compared with the old, inconsistent and expensive cast methods used to fabricate multi unit screw retained implant restorations.

Venue

Hotel La Tour, Albert Street, Birmingham, B5 5JE

Registration, refreshments & buffet are available from 6.30pm ready to start at 7.00pm

Location - London Stansted Airport

Speaker -  Steve Campbell

Date - 24th October - ADi Essex/Herts Study Club - Restoring Dental Implants - What's New?

Steve will outline the latest developments in CAD/CAM technology for the fabrication of custom abutments and screw retained implant restorations, along with looking at some new materials and techniques that offer us advantages over the traditional porcelains and acrylics that we sometimes use to restore implant restorations.

We will also see how these new solutions are often vastly more cost effective than what we have on offer with traditional restorative materials we have had in the past

Venue

Radisson Blu Hotel London Stansted Airport, Waltham Close, London Stansted Airport,                Essex, CM24 1PP

Registration, refreshments & buffet are available from 7.00pm ready to start at 7.30pm

Location - Belfast

Speaker -  Steve Campbell

Date - 14th November - ADi Belfast Study Club - Restoring Dental Implants - What's New?

Steve will outline the latest developments in CAD/CAM technology for the fabrication of custom abutments and screw retained implant restorations, along with looking at some new materials and techniques that offer us advantages over the traditional porcelains and acrylics that we sometimes use to restore implant restorations.

We will also see how these new solutions are often vastly more cost effective than what we have on offer with traditional restorative materials we have had in the past

Venue

The Ramada Hotel, Shaws Bridge, Belfast, Ireland, BT8 7XP

Registration, refreshments & buffet are available from 7.00pm ready to start at 7.30pm

Location - Warwickshire

Speaker -  Steve Campbell

Date - 20th November - ADi Warwick Study Club - Restoring Dental Implants - What's New?

Steve will outline the latest developments in CAD/CAM technology for the fabrication of custom abutments and screw retained implant restorations, along with looking at some new materials and techniques that offer us advantages over the traditional porcelains and acrylics that we sometimes use to restore implant restorations.

We will also see how these new solutions are often vastly more cost effective than what we have on offer with traditional restorative materials we have had in the past

Venue

Hilton Warwick, Junction 15, M40, A429 Stratford Road, Warwickshire, CV34 6RE

Registration, refreshments & buffet are available from 7.00pm ready to start at 7.30pm

Location - Edinburgh

Speakers - Dr Tim Doswell - Steve Campbell

Date - 28th November - Atlantis Isus - A guide to using the system for surgeons & technicians

Tim & Steve will demonstrate the unique clinical and cost effective advantages offered by using a premium CAD/CAM partner compared with the old, inconsistent and expensive cast methods used to fabricate multi unit screw retained implant restorations.

Venue

Edinburgh Dakota Hotel, 11 Ferrymuir Retail Park, South Queensferry, EH30 9QZ

Registration, refreshments & buffet are available from 6.30pm ready to start at 7.00pm

Booking

To book for any ADi Study Club you can either visit the website www.adi.org.uk and book 

or call the office, 020 8487 5555, or email info@adi.org.uk

To Book for any of the Atlantis Isus dates please contact Gill Hallet on 01453 793273 

or email gill.hallett@dentsply.com